Za kočnice nemam materijal crno na belo... ostalo mi je u sećanju sa jednog us foruma pa neka bude da lupetam
Što se tiče potrošača grešiš jer ler gas se drugačije ponaša u zavisnosti šta je uključeno od potrošača i da bi uvek radio kako treba mora da "nauči" koliko je to opterećenje, doduše slažem se za način uključivanja/isključivanja.. definitivno ide na prekidač!
Što se tiče menjača iz priloženog (podebljani deo...) možeš videti da ipak ima veze...
Copy/Paste iz mog user manual-a...
Because your vehicle’s engine is electronically controlled by a computer,
some control conditions are maintained by power from the battery. When
the battery is disconnected or a new battery is installed, the engine must
relearn its idle and fuel trim strategy for optimum driveability and
performance. To begin this process:
1. With the vehicle at a complete stop, set the parking brake.
2. Put the gearshift in P (Park) (automatic transaxle) or the neutral
position (manual transaxle), turn off all accessories and start the engine.
3. Run the engine until it reaches normal operating temperature.
4. Allow the engine to idle for at least one minute.
5. Turn the A/C on and allow the engine to idle for at least one minute.
6. Drive the vehicle to complete the relearning process.
² The vehicle may need to be driven 16 km (10 miles) or more to
relearn the idle and fuel trim strategy.
² If you do not allow the engine to relearn its idle trim, the idle
quality of your vehicle may be adversely affected until the idle
trim is eventually relearned.
When the battery is disconnected or a new battery installed, the
transmission must learn its adaptive strategy. As a result of this, the
transmission may shift firmly. This operation is considered normal and
will fully update transmission operation to its optimum shift feel.
If the battery has been disconnected or a new battery has been installed,
the clock and the preset radio stations must be reset once the battery is
reconnected.