
Odoh da skidam karter !!!

Moderator: Dragomir
Evo i ovdje imas malo pojasnjenja na tu temu ciscenja tog motoraTurbo failure associated with blocked oil feed on diesels are NOT caused by oil change issues. They are caused by leaking injector seals. These allow hot gas into the cam box and this carbonised the oil. These hard particles will block the turbo oil feed filter and the main sump strainer. A quick check for an impending problem can be done by removing the brake servo pump and checking its oil strainer. Any bits of carbon and you have a problem.
Often the injectors come loose over time and the problem can be cured by just tightening the bolts. Ford (same engine) recommend checking these bolts at certain intervals. Citroen don't!
If you don't cure the cause, your new turbo won't last long.
Van piše: ...за све те буђаве фордове